Fujitsu heat pumps for Palmerston North homes
Fujitsu is the quiet workhorse of the heat pump world. We fit them across the Manawatū, from older weatherboard places in Awapuni to newer builds out Feilding way.
Fujitsu heat pumps are a solid, mid-priced choice that handle Manawatū winters well. The e-Series high-walls warm a room fast and run quiet. We install them across Palmerston North, Feilding and Levin, and we'll size one to suit your home and budget.
Why Fujitsu works in Manawatū homes
Our winters are cold and damp, and the wind off the plain finds every gap in an old weatherboard house. A heat pump has to keep pushing warm air on the worst nights, not fade out when it drops to two or three degrees. Fujitsu's units hold their heat output down low, which is what matters here.
Most homes around Highbury, Takaro and Roslyn are modest older places with one main living area. A single well-placed Fujitsu high-wall does the job for a lot of them. If your layout is more spread out or you've got a colder end of the house, we'll talk through the heat pump types that might suit better before you commit to anything.
The Fujitsu e-Series and where it fits
The Fujitsu e-Series is the range we fit most. It's the value end of the Fujitsu line-up, so you get reliable heating without paying for features you'll never touch. Quiet on low fan, quick to warm a room, and simple to run day to day.
For a lounge or open-plan living area a high-wall e-Series is usually the pick. If you want heat down at floor level, say in a bedroom or a room where a high unit won't reach the corners, a floor mount can be the better call. We cover the difference on our page about floor console heat pumps so you can weigh it up.
- Steady heat output down to low outdoor temps
- Quiet running for bedrooms and living areas
- Straightforward controls, no fiddly menus
- Sizes to suit single rooms through to open-plan living
How Fujitsu compares to other brands
Fujitsu sits in the sweet spot between budget and premium. It's dependable and fairly priced, and that's why it's a common choice for subsidy-funded high-wall replacements in older homes.
If you want the top-shelf option with the best cold-climate performance, Daikin heat pumps are worth a look, though you'll pay more for it. We're happy to price both against your rooms so you can compare on the same job rather than guessing.
Getting the size and install right
A Fujitsu that's too small will run flat out and never quite warm the room. Too big and it short-cycles and costs more than it needs to. Getting the size right is the single biggest thing that decides whether you're happy with it. Our heat pump sizing calculator gives you a starting point, then we confirm it on site.
The install matters just as much as the unit. Pipe runs, where the outdoor unit sits out of the worst wind, and a tidy bracket that won't rattle in a Manawatū southerly. That's the detail we get right on every heat pump installation in Palmerston North.
Have a look at our heat pump installation cost and Warmer Kiwi Homes subsidy for more.
Not sure which Fujitsu suits your place?
Send us your room sizes and we'll tell you straight which model fits and what it'll cost. No pressure.
Fujitsu heat pump questions
Are Fujitsu heat pumps reliable?
Yes, they hold up well. Fujitsu has a long track record in New Zealand and the e-Series units are simple, which means fewer things to go wrong. Like any heat pump they last longest when they're sized right and given a clean filter now and then.
Is Fujitsu a good value heat pump brand?
It is. Fujitsu sits below the premium brands on price but still gives you steady, reliable heating. For a lot of Manawatū homes it's the best balance of upfront cost and performance, which is why we fit so many of them.
Are Fujitsu heat pumps eligible for the Warmer Kiwi Homes grant?
The grant isn't tied to a brand, so a Fujitsu can qualify. Warmer Kiwi Homes covers up to 80% of the cost with a cap, and you apply through EECA, not us. Check the details on our Warmer Kiwi Homes subsidy page and see if your home is eligible.
How much does a Fujitsu heat pump cost installed?
It depends on the model, your room size and how tricky the install is. A single high-wall in a straightforward spot costs less than a large unit with a long pipe run. We give you a fixed price after we've seen the job, and you can read more on our page about heat pump installation cost.
Ready for a Fujitsu quote?
We install across Palmerston North, Feilding and Levin. Call us on 06 242 4317 or send your details and we'll come back with a fixed price. For a full rundown on what a fit-out involves, see our notes on heat pump installation cost.